Skip to content
Fort Lauderdale, FL 24/7 emergency service
Electrician working on wiring inside a circuit breaker panel

Fort Lauderdale, FL

Electrical Panel Replacement in Fort Lauderdale

When a breaker panel is damaged, corroded, failing or no longer accepted by your insurer, we replace it with new, properly installed equipment.

  • Free estimates
  • Same-size or upsized panels
  • Permitted where required

Overview

When Replacement Is the Right Call

Panel replacement means removing the existing breaker panel and installing a new one, usually at the same amperage. It is the right fix when the panel itself is the problem — worn bus bars, corrosion, heat damage, obsolete breakers that are hard to find, or a brand that insurers and inspectors routinely flag.

If you also need more capacity, we will tell you, and the job becomes a panel upgrade or service upgrade instead. If only one component has failed on an otherwise sound panel, a repair may be enough.

  • Removal of the old panel and installation of a new panel and breakers
  • Every circuit reconnected, tested and clearly labeled
  • Damaged conductor ends and terminations corrected
  • Grounding and bonding verified
  • Coordination with the inspector and utility where required
Electrician fastening components inside a breaker panel

When to call

Signs Your Panel Should Be Replaced

  • Rust or water staining inside the panel, common in coastal and garage locations
  • Scorched breakers, melted insulation or a burning smell
  • Breakers that will not reset or trip for no clear reason
  • Buzzing or crackling from the panel
  • A panel brand your insurer, home inspector or 4-point report flagged
  • Obsolete breakers that are no longer manufactured
  • Visible damage after a storm, flood or water intrusion
  • A loose or missing dead-front cover exposing live parts
Rusty, outdated electrical cabinet with exposed wires
Illustrative footage

Problems we solve

Common Panels We Replace

We do not judge a panel by brand alone, but these situations come up often in Broward County homes:

Obsolete brands

Panels from manufacturers such as Federal Pacific (Stab-Lok), Zinsco and some older Challenger models are often questioned by insurers.

Corroded outdoor panels

Salt air, sprinkler overspray and humidity can corrode outdoor and garage panels over time.

Heat-damaged panels

Loose connections cause heat, discoloration and melted parts that require replacement.

Full panels

Panels packed with tandem breakers and no room for safe additions.

Storm-damaged panels

Water intrusion or surges can damage breakers and bus bars.

DIY or unpermitted work

Panels with mismatched breakers, double taps or improper wiring.

What to expect

What to Expect

  1. Evaluation

    We inspect the panel and service, test where needed, and confirm replacement is the right fix.

  2. Clear estimate

    A written estimate with the scope, permit and inspection steps.

  3. Scheduling

    We book a date and tell you how long the power will be off.

  4. Replacement

    Old panel removed, new panel mounted, circuits reconnected and labeled.

  5. Testing

    Every circuit is tested and the main and branch breakers verified.

  6. Inspection

    The required inspection is completed and you get a walkthrough.

Photos

Panel Replacement Photos

Weathered outdoor electrical panel with exposed wiring
Weathered panel due for replacement
Electrician working on an electrical panel with a power driver
Panel installation in progress
Organized circuit breaker panel with labeled, color-coded wiring
Finished, labeled panel

Licensed stock photos shown for illustration.

Safety & permits

Why Panel Replacement Needs a Qualified Electrician

Even with the main breaker off, the service conductors feeding a panel remain energized unless the utility disconnects them. Mistakes at the panel can cause shock, arc flash or fire long after the work is done.

Panel replacements in Broward County generally require an electrical permit and final inspection. We handle the work to code and explain the permit and utility steps for your property.

  • Proper torque on every termination
  • Correct breaker type for the panel
  • Neutrals and grounds separated where required
  • Clear circuit directory for future service
Electrician examining a residential electrical panel

Pricing

What Affects the Cost

Replacement pricing depends on what we find. The main factors are:

  • Panel size and typeThe amperage and number of spaces needed.
  • Condition of conductorsCorroded or heat-damaged wire ends may need repair.
  • LocationOutdoor, flush-mounted or tight locations take more work.
  • Code updatesAFCI/GFCI breakers or surge protection that code requires.
  • Utility involvementWhether FPL needs to disconnect service.
  • Permit and inspectionFees and scheduling for your city.
Electrician adjusting breakers in a circuit breaker panel
Free estimates. Send photos of your panel and a short description through the booking form, or call or text, and we will give you a clear written estimate before any work begins.

Who we help

Who We Replace Panels For

Homeowners

Insurance renewals, home sales, storm damage and failing equipment.

Condo owners & associations

Unit panel replacements coordinated with management.

Property managers

Turnover and insurance-driven replacements across multiple units.

Businesses

Replacement of worn or damaged commercial panels with planned shutdowns.

FAQs

Electrical Panel Replacement FAQs

What is the difference between panel replacement and a panel upgrade?

Replacement swaps the panel for new equipment, usually at the same amperage. An upgrade adds capacity, often with new service equipment. We recommend whichever matches your needs.

Is my old panel dangerous?

Not every old panel is dangerous, but signs like heat, corrosion, buzzing or breakers that do not trip correctly mean it should be evaluated promptly.

My insurer said my panel must be replaced. Can you help?

Yes. Send us the insurer or 4-point inspection note and photos of the panel and label, and we will quote the replacement and provide documentation of the completed work.

How long does panel replacement take?

Usually a day on site for a typical home, plus time for permitting and inspection.

Can you replace a panel the same day?

For emergencies we act as fast as safely possible and make the situation safe right away. Permitted replacements usually require scheduling.

Will you need to cut drywall?

Sometimes, especially with flush-mounted panels. We explain this in the estimate and keep openings as small as practical.

Do I need to replace my meter too?

Not always. If the meter base is damaged or the service is being upsized, it may need replacement.

Can I stay home during the replacement?

Yes, but the power will be off for part of the day.

Do you replace commercial panels?

Yes, including planned shutdowns to minimize disruption.

Do you offer free estimates?

Yes. Photos through the booking form help us quote quickly.

Helpful answers

Questions Before You Book?

Browse our panel replacement questions or search more than 120 answers in the electrical FAQ center.

From the Empire Blog

Book online

Request Electrical Panel Replacement

Choose a preferred date and time, add photos, and we will contact you to confirm. Prefer to talk? Call or text (754) 224-6319.

Book an Electrician

Tell us what you need. We will review your request and contact you to confirm a time.

Step 1 of 7 — What electrical service do you need?

Not sure? Choose "Other Electrical Service" and describe the problem in step 4.

Talk to a Fort Lauderdale Panel Electrician

Free estimates. 24/7 emergency service by phone at (754) 224-6319.