Skip to content
Fort Lauderdale, FL 24/7 emergency service
Weathered outdoor electrical panel with exposed wiring

Fort Lauderdale, FL

Fuse Box Replacement in Fort Lauderdale

Replace an outdated fuse panel with a modern breaker panel sized for today’s loads — often the key step for insurance approval or a smooth home sale.

  • Free estimates
  • Insurance-ready equipment
  • Permitted where required

Overview

Why Replace a Fuse Box

Fuse boxes were standard in homes built before the 1960s and still turn up in older Broward County homes. Fuses themselves can protect a circuit, but fuse panels are usually small, have limited capacity, and are easy to defeat by installing an oversized fuse.

Many insurers will not write new policies on homes with fuse panels, and buyers often ask for them to be replaced. Converting to a breaker panel gives you modern protection, more capacity and room to add circuits.

  • Removal of the fuse panel and any sub-fuse boxes
  • New breaker panel sized by load calculation
  • Circuits reconnected, tested and labeled
  • Grounding and bonding brought up to current requirements
  • Service equipment upgraded when needed
Weathered outdoor electrical panel with exposed wiring

When to call

Signs It Is Time

  • Your home still uses screw-in or cartridge fuses
  • Fuses blow often, or someone has installed larger fuses
  • Your insurer or a 4-point inspection flagged the fuse panel
  • You are selling or buying a home with a fuse box
  • You need more circuits or more capacity
  • The panel shows rust, heat marks or damage

Problems we solve

Risks of Keeping an Old Fuse Box

Oversized fuses

A fuse rated too high for the wire lets the wire overheat before the fuse blows.

Limited capacity

Many fuse panels were 60 amps — not enough for central AC and modern appliances.

Insurance problems

Fuse panels commonly cause underwriting issues in Florida.

Aging connections

Decades-old terminations loosen and heat over time.

What to expect

Fuse Box to Breaker Panel Conversion

  1. Evaluation

    We inspect the fuse panel, service and wiring.

  2. Load calculation

    We size the new panel and service.

  3. Estimate

    Scope, permit and utility steps in writing.

  4. Installation

    New breaker panel installed and circuits connected.

  5. Corrections

    Grounding and protection upgraded as required.

  6. Inspection

    Final inspection and walkthrough.

Safety & permits

Safety and Permits

Fuse panel conversions generally require an electrical permit and inspection in Broward County, and often involve utility coordination if the service is upgraded.

Older homes may also have older wiring types. We look at what is connected to the panel and tell you about anything that should be addressed.

Electrician examining a residential electrical panel

Pricing

What Affects the Cost

The main factors are:

  • New panel sizeSame capacity vs. upgrade to 150 or 200 amps.
  • Service equipmentMeter base or service conductors needing replacement.
  • Sub-panelsAdditional fuse boxes elsewhere in the home.
  • Wiring conditionRepairs to brittle or damaged conductors at the panel.
Organized circuit breaker panel with labeled, color-coded wiring
Free estimates. Send photos of your panel and a short description through the booking form, or call or text, and we will give you a clear written estimate before any work begins.

FAQs

Fuse Box Replacement FAQs

Are fuse boxes illegal in Florida?

Existing fuse panels are not automatically illegal, but many insurers will not cover homes with them, and new work must meet current code.

Will replacing my fuse box help my insurance?

It often resolves underwriting questions, but we cannot promise any insurer’s decision. Ask your insurer what they require.

How long does a fuse box replacement take?

Usually one day of on-site work, plus permit and inspection time.

Do I need a bigger service?

Often, yes. Many fuse-panel homes have 60 or 100 amps. A load calculation tells us.

Can you keep my existing wiring?

Usually, yes, if it is in serviceable condition. We will point out any concerns.

What about two-prong outlets?

They are a separate issue. We can add grounding where practical or GFCI protection as an alternative.

Is a permit needed?

Generally yes for panel replacement in Broward County.

Can I just replace the fuses with breakers that screw in?

Screw-in breaker plugs exist but do not solve capacity, insurance or panel-age issues. A panel replacement does.

Helpful answers

Questions Before You Book?

Browse our older panel questions or search more than 120 answers in the electrical FAQ center.

From the Empire Blog

Book online

Request Fuse Box Replacement

Choose a preferred date and time, add photos, and we will contact you to confirm. Prefer to talk? Call or text (754) 224-6319.

Book an Electrician

Tell us what you need. We will review your request and contact you to confirm a time.

Step 1 of 7 — What electrical service do you need?

Not sure? Choose "Other Electrical Service" and describe the problem in step 4.

Talk to a Fort Lauderdale Panel Electrician

Free estimates. 24/7 emergency service by phone at (754) 224-6319.