100-Amp vs. 200-Amp Electrical Panels: What Fort Lauderdale Homeowners Should Know
What amperage really means, how South Florida loads like central AC, heat strips, pools and EV chargers add up, and how an electrician decides…
Read more →Our main specialty
Upgrade an overloaded, outdated or insurance-flagged panel to modern, properly sized equipment — with a load calculation, clear options and permitted work where required.
Overview
An electrical panel upgrade replaces your main breaker panel with new equipment sized for the way you use power today. Depending on your property, it can be a straight panel replacement at the same amperage, or part of a larger service upgrade (for example, 100 amps to 200 amps) that also replaces the meter base and service conductors.
Every upgrade starts with understanding your existing service and your planned load — air conditioning, water heater, range, dryer, pool equipment, EV charger, workshop or home office. That tells us the right panel size and how many circuits you need, so you do not pay for more than you need or end up short a year later.

When to call
Most upgrade requests start with one of these:
Problems we solve
Overloaded circuits are redistributed and properly protected so breakers stop tripping under normal use.
Replacing obsolete or flagged equipment removes a common objection from insurers and buyers.
A larger panel gives you spaces for new circuits for EVs, generators, kitchens and additions.
New breakers and bus bars replace worn, corroded or heat-damaged parts that can cause fires.
We correct double-tapped breakers, mismatched breaker brands and wiring that is too small for its breaker.
A properly sized panel can be set up for a generator inlet and transfer switch.
What to expect
We inspect the panel, meter and service, note the brand and condition, and review what you plan to add.
We calculate your demand to confirm whether a same-size panel or a service upgrade is the right choice.
You get a clear scope and price, including any permit, utility and inspection steps.
Where required, the permit is pulled and the work scheduled. We tell you how long power will be off.
The old panel is removed, the new panel installed, circuits reconnected, labeled and tested.
The inspector signs off where required, and we walk you through your new panel.
See the work
Illustrative licensed stock footage.
Safety & permits
Panel work happens on the conductors that bring all of the power into your building, and some parts stay energized even with the main breaker off. It is not a DIY job.
In Broward County, panel replacements and service upgrades generally require an electrical permit and a final inspection, and service work usually needs Florida Power & Light to disconnect and reconnect power at the meter. Exact requirements depend on your city and the scope of work — we explain what applies to your home before you commit.

Pricing
We do not publish one-size-fits-all prices because panel upgrades vary widely. These are the factors that move the price:
Photos of the panel with the door open, the label inside the door, and the meter help us give an accurate estimate faster.

Who we help
Older Fort Lauderdale homes moving from fuse boxes or 100-amp service, and homes adding EVs, pools or additions.
Unit panel replacements coordinated with building management and association rules.
Insurance-driven upgrades and turnover repairs with tenant access coordination.
Panel upgrades for added equipment, renovations and tenant improvements.
FAQs
If the problem is one bad breaker or a loose connection on an otherwise healthy panel, a repair may be enough. If the panel is out of space, overloaded, corroded, heat-damaged, or a brand your insurer will not accept, an upgrade is usually the better long-term fix. We tell you honestly which one you need.
The installation itself is often completed in one day for a typical home. Permitting, utility coordination and inspection add time before and after. We give you a schedule up front.
Yes, for part of the day. We plan the shutdown ahead of time so you can prepare refrigerators, medical equipment and work-from-home needs.
Panel replacements and service upgrades generally require an electrical permit and inspection in Broward County. We confirm the requirements for your city and scope.
It depends on your square footage, appliances, AC tonnage and planned additions. Many homes are well served by 200 amps; some are fine at 150 amps, and large homes with heavy loads may need more. A load calculation answers this.
Yes. Unit panels in condos can usually be replaced, and we coordinate with building management on access, shutoffs and association requirements.
We cannot promise insurance pricing. Many insurers do ask about panel type and age, and replacing obsolete equipment can resolve underwriting questions. Check with your insurer.
Yes. Current code commonly requires a surge protective device when dwelling service equipment is replaced, and we recommend it either way for Florida lightning.
Yes, and doing it at the same time is efficient. We can include the charger circuit in the panel plan.
Book through the form on this page with photos of your panel, call or text (754) 224-6319, or email us. Estimates are free.
Helpful answers
Browse our electrical panel upgrade questions or search more than 120 answers in the electrical FAQ center.
What amperage really means, how South Florida loads like central AC, heat strips, pools and EV chargers add up, and how an electrician decides…
Read more →Tripping breakers, warm panels, rust, flickering lights and insurance questions are common signals. Here is how to read the signs, what an electrician checks,…
Read more →Book online
Choose a preferred date and time, add photos, and we will contact you to confirm. Prefer to talk? Call or text (754) 224-6319.
Tell us what you need. We will review your request and contact you to confirm a time.
Thank you. Your booking reference is . Your appointment is pending confirmation — we'll contact you to confirm a time. A copy of your request has been emailed to you.
For anything urgent, call (754) 224-6319.
Free estimates. 24/7 emergency service by phone at (754) 224-6319.